Belajar Jaringan Komputer Melalui Cisco!!!

CISCO PACKET TRACER
Membuat jaringan peer to peer menggunakan Cisco Packet Tracer

 

CLI pada cisco

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hostname router_rizqim.nsrllh

router_rizqim.nsrllh(config)#enable password *********

router_rizqim.nsrllh(config)#interface fastEthernet 0/1

router_rizqim.nsrllh(config-if)#ip address 192.168.10.100 255.255.255.0

router_rizqim.nsrllh(config-if)#no shutdown

router_rizqim.nsrllh(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

router_rizqim.nsrllh(config-if)#exit

router_rizqim.nsrllh(config)#exit

router_rizqim.nsrllh#

%SYS-5-CONFIG_I: Configured from console by console

router_rizqim.nsrllh>enable

Password:

router_rizqim.nsrllh#write memory

Building configuration...

[OK]

Pengertian nya :
1. configure terminal = Change host name
2. enable password = Memberi password pada CLI
3. ip address = Setting/memberi ip address
4. no shutdown = menghidupkan router yang mati
5. exit = keluar dari configure
6. write memory = save